All Products

Box of 10.  Bulb #63 medium bayonet base, 7 volt .63 amps.

These 6502A Micropocessors have an on-board clock and operates at 2 MHZ.   These are pulls from arcade games.   They are made by various...

Socket, 68 pin square PLLC.  Thru hole type. 

MC68000FN12 cpu.  68 pin PLCC socket required.  Used on Data East(520-5092-01) and Sega(237-0139-00) pinball 192x64 Dot Matrix display...

Price is for 1 each. Capacitor 6800uf, 25 volt with snap in leads. Picture is for reference only, actual device may differ.

Price is for 1 each.  Capacitor 6800uf, 50 volt with snap in leads.  Atari Asteroids monitor. Picture is for reference only, actual device...

IC 6802 Microprocessor, 8 bit, 1 mhz.  Used on Williams, Bally, Data East CPU boards, sound boards.  Yes, it's old.  Based on the...

MC6803G, MPU. The Bally/Midway 6803 pinball systems used it on the Control board at U1.  Part number: 0360-00803-0048.  Bally "Cheap Squeak"...

Vintage Microprocessor MC6808P.  1 MHz operation.  Used in Bally/Williams sound circuits and other games from the past.  The MC6808 is...

Vintage Microprocessor MC6809P.  1 MHz operation.  Has internal clock oscillator, only requires an external 4 MHz crystal.  This batch...

Vintage Microprocessor HD6809P.  Up to 1 MHz operation. Has internal clock oscillator, only requires an external crystal.  Same as MC6809P.&...

Price is for 1 each.  Vertical Electrolytic Capacitor - Snap-In leads.  680uf at 250 volts, 105c degrees. Picture is for reference only,...

6821 integrated circuit, PIA - "peripheral interface adapter".  These are used in pinball machines going all the way back to 1978.  Very...

MC68A45 CRT Controller.  Used in early arcade "Merit Trivia" games.  Also used in Sega/Data East pinball DMD controller boards on the...

Vintage Microprocessor HD68B09EP. The "B" indicates up to 2 MHz operation. The "E" indicates External clock generator required, no internal...

Vintage Microprocessor MC68B09EP. The "B" indicates 2 MHz operation.  The "E" indicates External clock generator required, no internal clock...

MC68B45 CRT Controller 40 pin IC. Used in early arcade "Merit Trivia" games. Also used in Sega/Data East pinball DMD controller boards on the 192x64...

7 AMP GLASS FUSE. 3AG size 1.25" x 1/4" (6.3x32mm)  - FAST BLOW.  Max circuit voltage 250 volts.

7 AMP GLASS FUSE. 3AG size 1.25" x 1/4" (6.3x32mm)  - SLOW BLOW.  Max circuit voltage 250 volts.

Box of 5 Bussmann AGC 7 amp fuses in the original metal box. 3AG size 1.25" x 1/4" (6.3x32mm) - FAST BLOW. Max circuit voltage 250 volts. New old...

7 AMP MSL GLASS FUSE. Size 1.25" x 1/4" (6.3x32mm) - SLOW BLOW. Max circuit voltage 250 volts.  This new old stock fuse was replaced by the MDL...

7.5 AMP GLASS FUSE. 3AG size 1.25" x 1/4" (6.3x32mm)  - FAST BLOW.  Max circuit voltage 32 volts.

LM723CN Voltage Regulator IC, adjustable 3 to 37 volts.  14 pin dual inline package.  Used on Williams System 7 to 11c and Data East...

SG723CN Voltage Regulator IC, adjustable 3 to 37 volts.  14 pin dual inline package.  Used on Williams System 7 to 11c and Data East...

Light Bulb #73.  Box of 10.  Mini Wedge base.  14 volt, .80 amps. Used in IGT S2000 slot machine buttons.

7406 Integrated circuit 14 pin dual inline package.  Hex inverter drivers with open collector outputs. Datasheet

74175 Quad D-Type Flip-Flop. 16 pin DIP.  Please note: This is old TTL with analog outputs.  It may not work where a LS/HTC version is used....

7432 Quad 2 input OR Gate. 16 pin DIP. These are old stock from our old parts bins. Please note: This is old TTL with analog outputs.  It...

74ALS139 Dual 1 of 4 Decoder/Demultiplexer in a dual inline package (DIP).  These are new old shock.  All are tested in Our TL866CS eprom...

IC 74ALS576 an Octal D-Type Edge-Triggered Flip-Flop with 3-STATE Outputs.  Used on Williams 8 driver expansion board. Datasheet

74HC245 Octal Bus Transceiver, 20 pin DIP.  This is the HC version (High Speed CMOS).  Will not replace a LS version (Low Power Shotsky,...

74HC373 is an octal D-type transparent latch featuring separate D-type inputs. This is a CMOS version, it will not work as a replacement for LS (TTL)...

74HC74 IC is a dual D flip-flop with CMOS outputs.  This will not replace a LS (TTL type).  These are new old stock.  All have been...

74LS02 Quad 2 Input Positive Nor Gate.  New old stock.  All units are tested in our TL866CS eprom tester.   Datasheet

74LS125 Quad 3-State Buffer. 14 pin DIP. These are old stock from our old parts bins. All tested good on a Mini-Pro TL866CS eprom programmer with...

74LS138 IC used on most older video game boards.  Mostly as a selector of rom and ram banks. Datasheet These were purchased in China. All tested...

74LS154 integrated circuit, dual inline package.  4 to 16 line decoder/demultiplexer.  These are common failure on early Bally and Stern...

IC 74LS161 counter.  Most video games have these and they fail often.  Used in the timing circuits, count-down chains.  Datasheet...

74LS163 Fully Synchronous Counter. 16 pin DIP.  New old stock.  All are tested on our TL866CS eprom programmer. Datasheet

Octal 3-STATE Buffer/Line Driver/Line Receiver - 74LS240F Integrated Circuit, 20 pin Dual Inline Package (ceramic).  This is the older original...

Octal 3-STATE Buffer/Line Driver/Line Receiver - 74LS240N Integrated Circuit, 20 pin Dual Inline Package (plastic). Datasheet These are new old stock...

Octal 3-STATE Buffer/Line Driver/Line Receiver - 74LS241N Integrated Circuit, 20 pin Dual Inline Package (plastic).  Picture may vary, different...

IC 74LS244 Octal Buffer. Datasheet

74LS257 Quad Data Selector. 16 pin DIP. These are old stock from our old parts bins. All tested good on a Mini-Pro TL866CS eprom programmer with CMOS/...

74LS273 Octal D type Flip-Flop with clear.  20 pin DIP.  New old stock.  All tested on a Tl866CS eprom programmer. Datasheet

74LS374 Octal D-Type Flip-Flop Tri-State Outputs. 20 pin DIP. These are old stock from our old parts bins. All tested good on a Mini-Pro TL866CS...

74S244 Octal Buffer/Line Driver with 3-State outputs.  20 pin DIP.  New old Stock.  All are tested on a TL866CS eprom programmer....

7805 Voltage Regulator, 5 volt, 1 amp.  TO220 package.  Also known as  LM340T5. Pictures may vary. Datasheet