All Products

Replacement Shooter Rod for Gottileb pinball games. Knob rim to end of shaft is 7 3/4".  Shaft length is 7 3/16".   Shaft to "E" clip notch...

Shooter Rod Nylon Housing used on older Gottlieb and Bally pinball machines.

Shooter Rod Trim Plate used on older Gottlieb and Bally pinball machines.

Shooter Spring Max Strength for pinball machines.  The most powerful strength pinball shooter rod spring.  Sometimes painted RED. ...

Gottlieb Standard pinball shooter spring.  Medium strength not painted, (Silver).  Sometimes called Medium Strength.  Used on many...

Gottlieb Weak Shooter Spring. Used on many makes and model pinball machines. Length 6 1/2", inside diameter 3/8".   Stern Green (266-5001-04)

Black rubber shooter plunger tip for pinball machines.  ref:545-5027-00  ref:A1344

Price is for 1 each.  SK3443 Transistor Picture is for reference only, actual device may differ. Datasheet

Bally Sky Kings pinball circa 1973. This single player Bally electro-mechanical pinball had a bunch of burned up coils and wires. Must have been over-...

This pinball was a real mess.  The customer got stuck, paid too much for a "working" game.  We advised not to repair it... but,...

Black Sleeve bumper for pinball machines.  Shorter 7/8"L x 1/2"W x 1/4"I.D.  ref:545-5009-00  Stern/Data East/Sega

Pinball Sleeve, black 1 1/16" tall with a 1/4" hole.

Black Sleeve bumper, Tee Shape, for EM  pinball machines. 

Sleeve bumper for pinball machines.  Yellow 13/16" tall x 3/4" diameter.  ref:23-6770.  Used on spinning lamp assembly on Williams...

Sleeve bumper for pinball machines.  Yellow 3/4" x 5/8".  ref:23-6551

Sleeve bumper cone for pinball machines.  Black 3/4" tall x 5/8" diameter.  Ref: 23-6632

Sleeve bumper cone for pinball machines.  Yellow 3/4" tall x 5/8" diameter.  Ref: 23-6579

Sleeve for pinball shooter rod. 2 1/4" long x 7/16" diameter.  Williams/Bally 03-7357

Price is for 1 each.   Slide Switch Miniature SPDT (Single Pole Double Through).

Slingshot Kicker Head - used on old Bally pinballs.  No Longer available.  Use Williams pn 03-7501.

Williams pinball slingshot kicker head, nylon.  Can be used to replace old Bally pn: C-1062

Here we shopped out a 1991 SlugFest by Williams Pinball.  This pitch and bat game has all the fun stuff of all the old baseball machines crammed...

Williams/Bally pinball coil.  Used to move the eys in Rudy's head.

Snaphat Battery/Crystal for Midway arcade games using the Vegas game board system.  Brand new.  Used in Blitz 2K-Showtime, Gauntlet Dark...

Replacement for the AS-2516-66 Solenoid Expander Board on some Williams Pinball Games.  Used on: Black Belt, BMX, Eight Ball Deluxe, Eight Ball...

Solid State Relay Single Phase water resistant.  Input trigger 3 to 32 volts DC.  Switched load up to 40 amps at 24 to 380 volts AC.  R...

Williams Cyclone Pinball Sound Board.  Good pull.  Sold AS-IS Working.  No warranty for this item. 

We picked up this 1980 Bally "Space Invaders" pinball with instructions to just shop it out but don't go too far.  The customer knew it looked...

Space Odyssey electromechanical pinball made by Williams circa 1976.  This two player pinball sent us looking for missing parts on it's...

This repair shop out is on a Space Station pinball made by Williams in 1987.  This job was standard work except for a missing part.  The...

Price is for 1 each.  4 inch 32 ohm speaker. 

6 inch speaker, 4 ohm 25 watt.  Used on Williams Pinballs and others.  Williams PN:555-12929-00

Bally/Williams pinball Spinner switch.  Also used on Ball Gates.  Includes the diode for newer games or remove it for EM games.  These...

Repair notes of Spirit of 76 Pinball by Gottlieb 1975.  This game is not fore sale.   Started with the cabinet. The back-box is falling...

Spirit pinball by Gottlieb from 1982.  Here is a rare Gottlieb with some interesting bells and whistles!  The slow spinning disc behind the...

Flipper Spring Retainer Bracket for Williams Flippers.  Price is for 1 each.

This Gottlieb "Square Head pinball was almost a lost cause.  We managed to get it running and stopped the playfield from rotting away. ...

Here is a repair of a Star Trek Next Generation pinball by Williams made in 1993.  This is one of our dreaded European models that...

Starter/Condenser for florescent lamps at 14, 15 and 20 watts. 

Starter/Condenser for florescent lamps at 25 watts.

Universal Starter/Condenser for florescent lamps at 4 to 30 watts. 

Starter/Condenser FS-5 for florescent lamps at 4, 6 and 8 watts. 

Williams pinball stepper motor replacement for B-12088.  No connector is included.  The colors may not match your old unit.  Comes...

Stern pinball switch, kick out. Replaces 180-5186-00

Stern, Data East and Sega pinball rollover switch.  Right hand type.  Can be used on Bally/Williams.

Stern, Data East, Sega pinball shooter switch

Stern, Data East, Sega pinball switch with flat blade.  Replaces 180-5190-00

Stern, Data East, Sega pinball switch,  short blade with roller.