All Products

LM350 Voltage Regulator, Adjustable,  5 volt, 3 amp  TO220 package. Datasheet

LM350K voltage regulator. 1.2 volt to 25 volt 3 amp in a TO-3 package. New old stock, various brands.   Datasheet

Voltage Regulator LM431ACZ.  2.5 volt to 36 volt adjustable at 100mA. Datasheet

LM7905, -5 volt voltage regulator, TO-220 style. Datasheet

Lock Cam 1 1/8" long. Measured - center of hole to end.   Belly door lock on IGT S+ and S2000 slot machines.

Lock Cam 1" long. Measured - center of hole to end.

Lock Cam 2" long. Measured - center of hole to end.

Lock Cam 5/8" Long. Single hole.  Measured from hole center to end.

Lock Cam 1 1/4" long.  Measured center of hole to end.

Lock Cam, 1 1/8" long with 1/8" off-set.  Measured - center of hole to end.  Bally Slot PN: P-00758-0093  S6000/Alpha

Lock Cam, 1 3/4" long

Lock Cam, 1 3/4" long with 1/2" off-set.  Measured - center of hole to end.

Lock Cam, 1 3/4" long.  Measured - center of hole to end. Offset 1/4".  IGT S+ and S2000 slot machine main door lock.

Lock Cam, Cash Box - JCM WBA. 5/8" long.  Measured - center of hole to end.

Lock for Pinball Backglass 5/8" with 2 keys and 1" cam.

Williams/Bally backglass lock kit.  Includes 5/8" lock with key, two 8x32 Torx security screws, cam and mounting plate.  The plate mounting...

Pinball metal lock plate to secure the backglass.  Used on Bally/Williams and can be made to fit others.  4" long, 3 1/4" hole to hole...

Pinball metal lock plate to secure the backglass.  Used on Data East, Sega and can be made to fit others.  5" long, 4" hole to...

Double Bit Lock. 1 1/8" depth with 2 keys #1382. Includes a 1 1/4" cam.  Made for pinball back-box glass locks.  Longer than a standard...

Standard coin door double bit lock. 7/8" depth with 2 keys #7500. Includes a 1 1/4" cam. Keyed alike. Fits most arcade game's coin door, cash-box...

Standard coin door double bit lock.  7/8" depth with 2 keys #1382. Includes a 1 1/4" cam.   Fits most arcade game's/pinball coin door, cash-...

Replacement Lock for Mills and Jennings Slot Machine back door.  "One Armed Bandit" types.  Can be used on Jennings without modifications.&n...

Lock, round, 5/8". Keyed alike.  Key # X01 (sold separately, click here).

Keyed alike Standard Low Security round tubular 5/8" lock kit.  This lock kit comes with 1 key #6086, a 2" cam, a 1 5/8" offset cam, 1 wood door...

Standard coin door lock.  Keyed alike.  Key #700.  Single Bit, 7/8" depth with 2 keys and cam.

Chinese coin door lock. Keyed alike. Key #521. Single Bit, 7/8" depth with 2 keys, 2 cams and a wood door ring.  The key can be removed from the...

Logic Probe for repairing printed circuit boards.  Tests all logic families.  Two frequency audio beeper.  Memory Function.

Lost World Pinball by Bally made in 1978.  We sold this game before we could post it on the website.  As you can see it is in really great...

Lost World by Bally.  This was one rough pinball to shop out.  The customer was informed the paint on the playfield was too far gone. ...

Gottlieb EM relay Coil, M-31-1500

Magnet Coil for Data East/Sega/Stern under playfield magnets. 511-5065-ND, replaced by  20-10197.  

Magnet Controller Board to Data East Pinballs

Magnet Core Hex Nut for Data East/Sega/Stern under playfield magnets.

Magnet Core Pug for Data East/Sega/Stern under playfield magnets.  530-5320-00

Magnet Threaded Core Weldment Assembly for Data East/Sega/Stern under playfield magnets.  515-6141-01

A basic volt/ohm meter with a backlight for the display.  Small and easy to use.  Has diode test and continuity beeper.

Price is for 1 each.  Mica Insulator for TO-3 Transistors.  Mainly used on Monitors, Amplifiers and Analog Power Supplies..

Price is for 1 each.  Replacement Micro Switch for Arcade Push Buttons and Joysticks.  These common switches have .187" width contact...

Price is for 1 each.  Replacement Micro Switch for Joysticks that use 1" blades.  These common switches have .187" width contact connector...

Generic Micro Switch with a 2" x 5/32" blade actuator.  It has a 34 gram resistance at the end of the blade.  A pinball has no problem...

Here is a Mill's Slot Machine "777".  This repair had to start with a full de-grease procedure.  You can see some of the ugly,...

Mills slot machine replacement glass for the spinning Reel Windows. Measures 3/16" thick x 1 3/4" wide x 4 1/4" long.  Price is for 1 each. ...

Here we repaired a 1987 Williams "Millionaire.  It's a bit rough but plays great!  Someone put the factory optional playfield protective...

This is a repair of a Black Cherry slot machine made by Mills.  It's a great example of the grand old One Armed Bandit games.  The...

This repair is on a Mills Slot Machine named "Deuce 2 Wild".  This job had the usual issues with dried up grease and oil, dirty mechanism and...

This game is NOT for sale.  This is a customer repair.  Mills Operator Bell, 1929, Jackpot Poinsetta Owl.  Did a complete tear-down...

Mills or Jennings  Slot Machine Repair Yes, we do repair Mills or Jennings Slot Machines made from 1926 to 1949.  Please call or fill out...