All Products

This IGT Triple Diamond slot is typical of the S-Plus model.  We test them very well!  Service notes follow: 10/20/2013 06:35:35 ...

Here we repaired an IGT video poker game with a dead monitor.  In addition to the service notes listed below we also replaced all the...

This IGT Balloon Bars slot is typical of the S-Plus model.  We test them very well!  Not much wrong with this one, a stuck handle and some...

This repair is on a 5x Play Wild slot machine made by IGT in 1997.  We went out to the customers home and found it blowing a 6 amp fuse. ...

IGT Slot, Double,  Red White and Blue from 1996.  This S-plus model had to come in to get a connection problem fixed and the batery...

IGT Triple Diamond slot, model s2000 made in 2004.  This is one of the newer models of IGT to come in lately.  Both batteries on the CPU...

This Indiana Jones pinball machine by Williams was a big repair project for us.  This game was never cleaned under the plastics.  As you...

IRF520 N-Channel Enhancement Mode power MOS transistor.  100 volts, 10 amps.  Common final for 11 and 10 meter radios. Datasheet   ...

Price is for 1 each.  Transistor IRF9540, MOSFET 100V P-CH HEXFET MOSFET Picture is for reference only, actual device may differ. Datasheet

Price is for 1 each.  IRL540 Transistor, N CHANNEL POWER MOSFET, 100V, 36A Picture is for reference only, actual device may differ. Datasheet

02/06/2013 12:12:21  Fixed battery holder acid leak, clean/wax/new rubber/new posts on the playfield, fixed broken ramp lift mechanism, modified...

This Jacks to Open pin has a very nice playfield.  Of course it had  battery leak damage, dried up capacitors, a shorted transistor and the...

Wiring harness for JAMMA type game boards.  This is the standard "Japanese Amusement Machine Manufacturer Association" design.   In...

Japanese Coctail Table Arcade Game with 2 KNOCK-OFF game boards.  This repair job was a challenge.  This game was sold to our customer...

This is a repair archive of a Jennings Standard Chief slot.  These were made in the late 1940's.  This machine had a rough life. ...

Here we fixed a Jennings Indian Head slot called Tic-Tac-Toe.  Most of these old slots are just stuck from lack of service over the long years.&n...

Jet Spin pinball by Gottlieb  1977  Electro-Mechanical game.

This "Johnny Mnemonic" by Williams (1995) has some neat features.  The glove toy moves left and right, forward and back.  There...

Here we repaired a JokerZ by Williams.  This game was in good condition.  The big issue was replacing the display glass.  There was...

Joystick,  4 way with short Red handle.  Common replacement for Ms Pacman and others.  Includes 4 micro switches with .187" width...

Joystick, Black, 4 or 8 way with long black ball handle.  Switches from 4 direction to 8 direction by flipping over the actuator at the bottom...

Joystick, Black, 8 way with long black handle.  Ultimate Joystick.  Includes 4 micro switches with .187" width blades.  These are...

Joystick with Red Handle.  Four switches with 1" blades.  Can be installed as 8 way or 4 way operation.  American style look and feel.

Replacement cartridge with sapphire needle for Rockola model 14xx (requires adapter plate).  This replaces the original cartridge (Astatic 51).&n...

Universal jukebox replacement phono cartridge. Well sort of.... This has the proper tracking weight and needle tip so if you can mount it, this does...

New diamond commercial duty replacement phonograph needles for Seeburg Jukebox models 220 thru PFEA1U.  Price is for (2) needles per package, 2...

New commercial duty replacement phonograph needle for many 45 RPM models. Used on Shure magnetic cartridge type M44CS on Rowe AMI and M44MR on Rock-ol...

Price is for 1 each.   Rowe CD jukebox centering hub for the CDM-12 player.

Price is for 1 each.   Jukebox Turntable Grommet for 1950's Rockola's and AMI G thru J.  3 per machine needed.

Price is for 1 each.   Jukebox Turntable Grommet (Opaque White) for Rockola/Rowe 45 RPM models.  Helps keep out the hum from your...

NO LONGER AVAILABLE, See TT-grommet.  Jukebox Turntable Grommet for Rowe/AMI models JAL - R83.  Also used on Rockola 45 RPM models made...

Price is for 1 set of 3 grommets.   Jukebox Turntable Motor Grommet (Black) for Rockola/Rowe 45 RPM models.  3 grommets per machine...

Price is for 1 each.  Jumper for printed circuit board headers.  Called a Header Shunt.  .1" spacing.  Very common jumper on hard...

This is a Jurassic Park pinball from Data East.  This one is actually a French version brought back to the good old USA.  The cabinet...

Chicago Coin Hold coil.  K-28-1100.

Key 1137B, common slot key

KEY 2300, common slot key

Key, Reset for IGT and Bally Slots #2341.  This is for the reset switch on the right side of cabinet.

Key Switch with 2341 key, momentary on.  For Bally and IGT slot machines.  Used to clear a jackpot or change the settings.

KEY X01, common slot key on slot machines.  This goes with our slot lock pn: LOCKR5_8_X01.

Key X02, common slot key

KEY X03, common slot key

KEY X04, common slot key

KEY X05, common slot key

Bally/Williams Kickback bracket.  Part of assembly A-15708

Kiss pinball by Bally from 1978.  This thing was a real mess.  Everything was broken or hacked.  Never have seen a switching power...

Price is for 1 each.  Black Potentiometor Control Knob.  1/4" ribbed shaft, black.

Bally pinball common knocker/kickback bracket.  Other uses: 01-11273, 535-5265-00