Playfield Parts Bottom Side

Belt for Fish Tales pinball by Williams.

Williams pinball belt for Police Force.  Moves the car.

Williams belt for Hurricane pinball.  Moves the Ferris Wheel.

Ball Popper coil bracket for Bally/Williams pinball games.  Has PEM nuts with 8x32 threads. On Kickout Selenoid Coil Assembly. Part Number: A-117...

Very common coil mounting bracket/coil maintainer for Bally/Williams pinball games.  For example: Williams Outhole Kicker or Slingshot or...

Plastic crank used on Adam's Family Bookcase motor or Star Trek Next Generation Gun Turrets.

Bally pinball Crate Kickout Popper weldment for Scared Stiff.

Williams pinball "Star Trek" diverter arm on underside track.  Common failure.  Ref: A-17268

Bally pinball diverter bracket used on NBA Fastbreak and Cactus Canyon.

Diverter Plunger and Spring assembly.  Plunger length 2 1/16".  Total length 2 9/16".  Used on later Bally/Williams pinball machines. &...

Williams pinball drop target reset assembly, 4 bank.  Includes 01-13274 reset plate.

Ball Return link for plunger.  Made of 1/16" thick fiber board.  Two are used per plunger.  Price here is for 1 each. Part Number: 01-4...

Bally/Williams Kickback bracket.  Part of assembly A-15708

Bally pinball common knocker/kickback bracket.  Other uses: 01-11273, 535-5265-00

Magnet Coil for Data East/Sega/Stern under playfield magnets. 511-5065-ND, replaced by  20-10197.  

Magnet Core Hex Nut for Data East/Sega/Stern under playfield magnets.

Magnet Core Pug for Data East/Sega/Stern under playfield magnets.  530-5320-00

Magnet Threaded Core Weldment Assembly for Data East/Sega/Stern under playfield magnets.  515-6141-01

Opto Magnet Bracket Assembly for Williams "No Fear" pinball machine.

Pulley for Fishing Reel on Fish Tales and Ferris Wheel on Hurricane.  Mounts on the motor shaft.  Outside diameter 1 1/2".

Bally/Williams pinball Spinner switch.  Also used on Ball Gates.  Includes the diode for newer games or remove it for EM games.  These...

Williams pinball stepper motor replacement for B-12088.  No connector is included.  The colors may not match your old unit.  Comes...

Bally pinball trap door bracket for Theater of Magic.  Original old stock, NOT stainless steel.

Williams/Bally cap for Vertical Up Kicker.  Has neck and slot for dowel pin type plunger.  See also A-11336 and 20-9314-7 .

Vertical Up-Kicker Cap with screw hole, Williams/Bally.

Vertical Up-kicker Compression Ring, Data East/Sega.  Three needed on Cap.  These hold the Dowel Pin in place.

Williams/Bally Pinball plunger for Vertical Up Kicker (ball popper).  3 7/8" long.  See also 20-9314-7 and 03-8053 .

Vertical Up-Kicker Plunger, Data East/Sega. Overall Length 3 3/4" long.   Data East/Sega pn: 515-5352-00 is and upgrade for pn: 515-5096-00.

Cap on Data East Vertical Up-Kicker.  Can be used on William/Bally if you purchase the thicker plunger (515-5352-00)  and dowel pin (251-500...

Vertical Up_kicker Spring, Data East/Sega.  Goes under the popper cap.

 Dowel Pin inside the cap on a Bally/Williams Vertical Up Kicker (VUK).  Dimensions 3/32" x 1/2".  This will fit loose.  Get 3 of...